OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-19
3.4 Menu Operation
This section describes details of operations in each menu.
However, explanations are given only for menu items specific to the maintenance mode. Refer to
the User’s Guide for explanations about the other menu items.
Note
Temperature unit appearing in this section can be converted as follows:
Fahrenheit = (Celsius x 9/5) + 32 degrees
3.4.1 MENU
3.4.1.1 INFORMATION
(1) TOTAL PRINT LENGTH
Press the MENU button, select INFORMATION with the Up and Down buttons, and then press
the OK button.
Select TOTAL PRINT LENGTH with the Up and Down buttons, and then press the OK button.
The length of media printed until now is displayed.
This counter is the total length counter and cannot be reset.
>>TOTAL PRINT LENGTH
YYYYYm
>INFORMATION
TOTAL PRINT LENGTH ◎
To Next Page
Loading...
