OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
6-116
6.12.9 O-RING
<Removal>
1. Drain the ink (see Chapter 3).
When all the ink has been drained, turn
off the printer.
2. Remove the
COVER(INKBOX-REAR)-MW (see
6.12.4).
3. Disconnect the joint of the tube
connected to the
SUPPLYPUMP-UNIT(MW).
4. Remove the O-RING attached to the
tube.
To Next Page
Loading...
