Oki IP-6620 - 7.10 Linear encoder position adjustment

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 7 Adjustment
7-39
7.10 Linear encoder position adjustment
< Verification procedure >
1. Remove the COVER(SIDE-R)-MW (see
6.3.7).
2. Open the caps manually (see 6.10.1).
3. Move the carriage manually to the
maintenance area.
4. Remove the following parts.
- COVER(SIDE-L)-MW (see 6.3.6)
- COVER(Y-RAIL)-SL-MW (see 6.3.3)
- COVER(Y-RAIL)-SR-MW (see 6.3.3)
- COVER(L)ASSY-MW (see 6.3.2)
- COVER(R)ASSY-MW (see 6.3.2)
COVER(Y-RAIL)-SL-MW
COVER(Y-RAIL)-SR-MW
COVER(L)ASSY-MW
COVER(R)ASSY-MW
COVER(SIDE-L)-MW