OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-100
3.6 Special Operations' Guidance
This section explains the guidance for the three special operations below:
- Starting the printer with setting the language;
- Starting the printer with setting the number of color selection; and
- Starting the printer after replacing the print head
For each guidance, a 3-digit time counter appears and decreases at intervals of 10 seconds with
the passage of time.
3.6.1 Starting the printer with setting the language
The following menu appears when:
- The printer is turned on for the first time after shipping; or
- when
it is started with the Power + MENU buttons held (special mode).
If no print head is installed, the installation guidance appears after this setting.
Select a language and press the OK button.
Press the OK button to confirm the selected language or press the CANCEL button to select a
language again.
Set a time zone and press the OK button.
Press the OK button to confirm the selected time zone or press the CANCEL button to select a
time zone again.
>>>TIME ZONE (GMT+)
YY/MM/DD HH:MM OK? ◎
>>>TIME ZONE (GMT+)
YY/MM/DD HH:MM +12 ◎
>>>LANGUAGE
ENGLISH OK? ◎
◎
>>>LANGUAGE
ENGLISH ◎
◎
INITIALIZING...
PLEASE WAIT
To Next Page
Loading...
