OKI Data Infotech Corporation CONFIDENTIAL
Chapter 8 Operation Mechanism
8-20
8.6 Print Modes
The print modes supported by this printer are shown in the table below.
*1
With the CIS model
High quality, high density
Max quality, high density
*1 The indicated print speed is when printing on the full-width of a roll of 1626 mm (64 inches) in width.
With the LCIS model
High quality, high density
Max quality, high density
*1 The indicated print speed is when printing on the full-width of a roll of 1626 mm (64 inches) in width.