OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-33
3.4.1.2 SETTING
(1) SYSTEM
Press the MENU button, select SETTING with the Up and Down buttons, and then press the OK
button.
Select SYSTEM with the Up and Down buttons, and then press the OK button.
Select PART REPLACEMENT with the Up and Down buttons, and then press the OK button.
(a) PART REPLACEMENT
This menu is used to configure whether or not to display warnings regarding consumables.
YYY: Setting after change
On: Display the warnings
Off: Do not display the warnings
The warnings can be disabled for the users especially in Japan, which the maintenance operators often
visit.
>>SYSTEM
PART REPLACEMENT ◎
>>>PART REPLACEMENT
YYY ◎
To Next Page
Loading...
