Oki IP-6620 - 5.7 Updating the Firmware; 5.7.1 Create an USB drive for updating the firmware

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
5-156
5.7 Updating the Firmware
5.7.1 Create an USB drive for updating the firmware
Create an USB drive for update by writing the system file on it.
<Procedure>
(1) Create a folder with the name CPL on the USB drive root directory.
(2) Create a subfolder with the name sys in the CPL folder.
(3) Copy the system image file system.img in the sys folder.
<File tree in the USB drive>