OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-76
(7) PRIME FILTERS (LCIS model only)
This procedure is used in the following cases.
- To remove air accumulated in the filters.
- To remove air in a filter after replacing it.
Note
Before starting the procedure, put the printer in the idle state (state with no errors), and open and
close the reservoir drawer to supply ink in the subtanks.
Press the OK button.
Press the OK button.
Y:YY: Time required (min:sec 10 sec unit)
(Operation is complete)
>PH MAINTENANCE
↕ PRIME FILTERS ◎
FILLING WITH LIQUID
TIME REQUIRED Y:YY
>PH MAINTENANCE
↕ PRIME FILTERS ◎
To Next Page
Loading...
