OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-105
Install the ink cartridge and close the ink box cover.
Check that a waste ink bottle is installed and press the OK button.
The filling of the print head starts.
After the filling is complete, remove the tool and press the OK button.
Check that a waste ink bottle is installed and press the OK button.
The cleaning of the print head starts.
The priming of the print head starts.
The guidance ends when the print head priming finishes.
PH RECOVERING XXXXXXX
REQUIRED TIME Y:YY
START PH RECOVERY
BOTTLE IS EMPTY? â—Ž
REMOVE XXXXXXX
INK SUCTION TOOL â—Ž
FILLING WITH LIQUID
TIME REQUIRED Y:YY
START FILLING
BOTTLE IS EMPTY? â—Ž
PRINTER READY
01 : PAPER/1626 mm
INITIALIZING...
PLEASE WAIT
To Next Page
Loading...
