OKI Data Infotech Corporation CONFIDENTIAL
Chapter 1 Overview of Maintenance Workflow
1-3
Table 1-2 Jigs
Fan-shaped tension gauge (0.1 to 20 N)
Double-side type
(Oba keiki seisakusho)
For adjusting SUS belt tension (push)
Round-type spring tension gauge (50 N)
For adjusting Y motor belt tension (pull)
- For adjusting the carriage height
- For adjusting the carriage parallelism
For adjusting the print heads inclination
For adjusting the wiping unit height
SINGLE COLOR FILLING TOOL (MV)
For supplying or draining one ink color
For checking leak tightness of the capping unit
Table 1-3 Consumables
Grease for synchro belt and
decelerating belt
Grease EM-60L (Dow Corning Toray Co.,Ltd.)
or an equivalent grease (silicon grease can be
used)
For protection from ink blot, commercially
available
For wiping ink blot, Kimwipes or equivalent
For cleaning contacts, etc.
Cleaning liquid cartridge
The number of necessary cartridges depends
on the number of ink colors
The number of necessary cartridges depends
on the number of ink colors
To Next Page
Loading...
