Oki IP-6620 - Page 205

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
5-46
<Description>
Media of less than 762 mm (30 inches) was installed when automatic nozzle map was
performed.
<Action>
Check the Items to be Checked on the table below, and perform the actions starting from the top
until the problem is solved.
No
Items to be Checked
Action
1
Firmware
Upgrade the firmware to the latest version.
2
Check that the media is 762 mm
(30 inches) or larger.
Use media of 762 mm (30 inches) or larger.
3
The detected width of the media
- Reinstall the media.
- Check that there are no problems with the media width
detection.
INSTALL WIDER MEDIA
◎