Oki IP-6620 - Page 302

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
5-143
No
Items to be Checked
Action
5
The unit connected to the
PCB-ASSY-HCB1M
(1) Check that the print head cable jacket is not damaged.
If damaged, replace it.
(2) If not damaged, reconnect it and restart the printer.
(3) If the problem persists, replace the cable of the faulty
print head with one of a print head operating normally.
If the error number changes, the faulty part is the print
head cable so replace it.
(4) Connect the print head cable to another print head. If
the error number changes for the newly connected
print head, check the other items to be checked below.
* The print head cable for the seventh print head is used
only for 7-color printers.
6
PCB-ASSY-HCB1M
Replace the PCB-ASSY-HCB1M.
7
INKJET HEAD,MW (print head)
Replace the defective print head.
8
PCB-ASSY-IPB5-100
Replace the PCB-ASSY-IPB5-100.
9
FFC
Replace all four FFCs.
10
Robot cable
Replace the robot cable.