OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
5-164
(1) Panel indication with the firmware updated successfully
When the online update completes successfully, the message below appears
Online update has completed.
After the online update, restart the printer.
The printer is restarting…
* With the firmware version, X. XX_XX on the message, check that the firmware has been
updated correctly.
The printer is initializing…
The printer has restarted.
(2) Panel indication with an error detected
If an error occurs while updating the firmware, the message below appears.
An error has occurred.
XXXX: Error code
PRINTER READY
01: PAPER/1626mm
INITIALIZING...
PLEASE WAIT
Booting up...
F/W Ver. X.XX_XX
UPDATE FAILED XXXX
RESTART PRINTER
To Next Page
Loading...
