Oki IP-6620 - Page 410

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
6-81
8. Open the COVER(CENTER)-F, and
remove:
- COVER(Y-RAIL)-SL-MW
- COVER(Y-RAIL)-SR-MW
- COVER(L)ASSY-MW
- COVER(R)ASSY-MW
For the procedure, see 6.3.
9. Remove the following parts.
- COVER-CARRIAGE-MW
- CARRIAGE-WEIGHT-ASSY
10. Remove the PCB-ASSY-ADJ1 (see
6.8.8).
11. Remove the screw securing the
COVER-EDGESENSOR to the
BASEHEAD_LOWER, and remove the
COVER-EDGESENSOR.
12. Disconnect the PCB-ASSY-SNS1
connector.
COVER-CARRIAGE-MW
CARRIAGE-WEIGHT-ASSY
COVER-EDGESENSOR
BASEHEAD_LOWER
PCB-ASSY-SNS1
コネクター