Oki IP-6620 - Page 66

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-26
(a) PRINTER SENSORS
This menu displays the sensor conditions in real time.
The buzzer sounds when the conditions of the sensors change.
Select a sensor to display with the Up and Down buttons.
Sensor
Sensor value
EDGE:
1: Media is installed
HOME POSITION:
1: Carriage is in the home position
CAP POSITION:
1: Caps are close
WIPER POSITION:
1: Wiper is in the home position
SUPPLY SIDE MEDIA:
1: Media is installed
OUTPUT SIDE MEDIA:
ROLL END:
1: End of the roll media
LEVER:
1: Lever is activated
FRONT COVER (R):
1: Cover is closed
FRONT COVER (L):
WASTE BOTTLE:
WASTE BOTTLE value is indicated with:
- 1 for the printer with waste ink bottle installed; or
- 0 for the printer without waste ink bottle installed.
AUTO ADJUST R:
Voltage is displayed by unit of 0.1V.
AUTO ADJUST G:
AUTO ADJUST B:
IONIZER (+):
IONIZER (-):
X: Sensor value (1/0)
>>>PRINTER SENSORS
 SUPPLY SIDE MEDIA: X
>>>PRINTER SENSORS
 WIPER POSITION: X
>>>PRINTER SENSORS
 CAP POSITION: X
>>>PRINTER SENSORS
 HOME POSITION: X
>>>PRINTER SENSORS
 EDGE: X