Oki IP-6620 - Page 77

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
3-37
(2) MEDIA HEATER SET.
(a) STANDBY TEMP
This menu is used to configure the standby temperature.
Press the MENU button, select SETTING with the Up and Down buttons, and then press the OK
button.
Select MEDIA HEATER SET. with the Up and Down buttons, and then press the OK button.
Set the standby temperature for the preheater and the printheater.
Fahrenheit Celsius
YY: Standby temperature
XXX: Current setting
YYY: Setting after change
Unit: °C (Celsius degree) or °F (Fahrenheit degree)
Setting range: 15 to 40 for Celsius temperature or 59 to 104 for Fahrenheit temperature
>>>STANDBY TEMP
 XXYY ºF ◎
>>>STANDBY TEMP
 XXYY ºC ◎
>SETTING
 MEDIA HEATER SET. ◎
MENU
 SETTING ◎