Field Service Ver. 1.0 Jun. 2008 8. Utility Mode
117
Adjustment / Setting
8.3 User Settings
8.3.1 System Settings
A. Language Selection
B. Measurement Unit Setting
C. Paper Tray Setting
(1) Priority Tray
(2) Auto Tray Switch ON/OFF
(3) No Matching Paper in Tray Setting
Functions • To select the language on the LCD display.
Use • To change the language on the control panel to another language.
Setting/
Procedure
• The language options depend on the marketing area.
Functions • To select the unit displayed on the LCD display.
Use • To change the unit displayed on the control panel.
Setting/
Procedure
• The default setting varies depending on the marketing area.
mm inch (Num. Value) inch (Fraction)
Functions • To set the tray for automatic selection when APS is being set.
Use • To specify the tray to be used when APS is being set.
Setting/
Procedure
• Select the tray on the tray select screen.
Functions • To set whether to automatically switch to another tray with same size paper when the
paper feed tray runs out of paper during printing.
Use • To switch the paper feed tray automatically.
Setting/
Procedure
• The default setting is Restrict.
Allow “Restrict”
Functions • To set whether to switch to another tray automatically when the specified tray runs
out of paper during printing.
Tray Fixed : It stops printing when the specified tray runs out of paper.
Tray Priority : To switch to another tray with the specified paper and print when
the tray is out of paper
Use
Setting/
Procedure
• The default setting is Tray Fixed.
“Tray Fixed” Tray Priority
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
Need help?
General
