Olivetti d-Color MF201 Service Manual

Field Service Ver. 1.0 Jun. 2008 8. Utility Mode
121
Adjustment / Setting
8.3.5 Printer Settings
A. Basic Settings
(1) PDL Setting
(2) Number of Copies
(3) Original Direction
(4) A4/A3 l LTR/LGR Auto Switch
(5) Document Hold Time
Functions • To set the PDL (Page Description Language) for PC printing.
Use • To fix the PDL as necessary. It usually switches automatically.
Setting/
Procedure
• The default setting is Auto.
“Auto” PCL PS
Functions • To set the number to be copied when not specified by the printer driver during PC
printing.
Use • To use when the number cannot be specified by the printer driver during printing from
Windows DOS, etc.
Setting/
Procedure
• The default setting is 1.
“1” (1 to 999)
Functions
• To set the default setting for the direction of the original during PC printing.
Use
Setting/
Procedure
• The default setting is Portrait.
“Portrait” Landscape
Functions • To set whether to switch between A4 and Letter (8
1
/
2
x 11) size paper, and A3 and
Ledger (11 x 17) size paper in reading.
Use • To output Letter (8
1
/
2
x 11) size document to A4 size, and Ledger (11 x 17) size doc-
ument to A3 size.
• To output A4 size document to Letter (8
1
/
2
x 11) size, and A3 size document to Led-
ger (11 x 17) size.
NOTE
• When switching the size, the image will be printed in the same magnification.
• The image will not be reduced when there is image deficiency.
Setting/
Procedure
• The default setting is ON.
“ON” OFF
Functions
• To set the period of time until it deletes the corresponding data when the memory
exceeds its capacity while spooling printed data.
Use
Setting/
Procedure
• The default setting is 5 minute.
“5M.” (0 to 30M.)
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201

Olivetti d-Color MF201 Specifications

General

Brand	Olivetti
Model	d-Color MF201
Category	All in One Printer
Language	English