Field Service Ver. 1.0 Jun. 2008 10. Service Mode
263
Adjustment / Setting
10.8.7 Color Regist
10.8.8 IU Lot No.
10.8.9 Machine Configuration
Functions • To check each of C, M, and Y for color shift amount.
• The data is updated after a color shift correction has been made or color shift adjust-
ment has been completed.
Use • Use for check when color shift is evident.
• Use for adjustment of PH skew.
Setting/
Procedure
• For each of C, M, and Y, the color shift amount (in X and Y directions) at two locations
(one at the front and the other in the rear) and the difference in color shift amount
between the front and rear (X and Y directions) are displayed.
• Display unit: dots
• The shift amounts is displayed with reference to K for C, M and Y, and that for K is
displayed with reference to an ideal position.
Functions • To display the 10-digit lot number for each of Cyan, Magenta, Yellow, and Black IUs.
• The lot number data is stored in EEPROM of each IU.
Use • Use for checking the IU Lot No.
Functions • To display unit configuration information such as options on the main machine, etc.
Use • To be used when checking the unit configuration information such as options on the
main machine, etc.
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
