Olivetti d-Color MF201 - Settings in the Security Settings

11. Security Settings Field Service Ver. 1.0 Jun. 2008
268
Adjustment / Setting
11.3 Settings in the Security Settings
11.3.1 CE Password
11.3.2 CE Authentication
11.3.3 Administrator Password
Functions • To set and change the CE password.
Use • Use to change the CE password.
Setting/
Procedure
• Enter the CE password (8 digits) on the on-screen keyboard.
• The initial setting is “92729272.”
Current Password : Enter the currently using CE password.
New Password : Enter the new CE password.
Re-Input Password : Enter the new CE password again.
NOTE
• NEVER forget the CE password. When forgetting the CE password, it becomes
necessary to replace the RAMU board with a new one and call responsible per-
son of KMBT.
Functions • To determine whether or not to authenticate CE password as entering Service Mode.
Use • Use when authenticating CE password as entering Service Mode.
Setting/
Procedure
• The default setting is OFF.
ON “OFF”
Functions • To set and change the administrator password.
Use • Use to change the administrator password.
• Use this function when the administrator forget the administrator password because
a new password can be set without entering the current administrator password with
this.
Setting/
Procedure
• Enter the administrator password (8 digits) on the on-screen keyboard.
• The initial setting is “12345678.”
New Password : Enter the new administrator password.
Re-Input Password : Enter the new administrator password again.
d-Color MF201
Service Manual Y109660-1
d-Color MF201