Field Service Ver. 1.0 Jun. 2008 13. Procedure for resetting
271
Adjustment / Setting
13. Procedure for resetting
13.1 Trouble resetting
13.2 Contents to be cleared by reset function
: Will be cleared (initialized)
: Some information will be cleared
: Will not be cleared
Functions • If the all troubles occur and the status would not be cleared by turning main power
switch OFF and ON again, or opening and closing the front door, clear the status of
the machine.
Use • To be used when the status would not be cleared by turning main power switch OFF
and ON again, or opening and closing the front door in case of a trouble.
Setting/
Procedure
1. Call the initial mode to the screen.
See P.272
2. Touch [Memory Clear] o [Trouble Reset].
3. Touch [OK] to reset troubles.
4. After turning off the main power switch, turn it on again more than 10 seconds after
and check if the machine starts correctly.
Items for clearing
Door open/close
Main power S/W OFF/ON
Memory Clear
Contents to be cleared
Tr o u b l e R es e t
System Error
System Data
Image Data
Own Setting
Fax dest.
Activity
Soft SW
Jam display  
Malfunction display Rank A 
Rank B   
Rank C  
Erratic operation / display    
Setting information of the machine
(fax/network)
   
Setting information of the machine stored in the
MFBUB (Except for fax/network)
 
Password information    
Destination information  
Activity management information   
Software switch setting 
Counter information 
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
Need help?
General
