6. Other Field Service Ver. 1.0 Jun. 2008
74
Maintenance
NOTE
• When reinstalling the scanner chassis on the engine frame, tighten screws in the
order shown below.
1. Right side (4 screws)
2. Rear side (2 screws)
3. Left side (2 screws)
6.3.31 Exposure unit
1. Remove the original glass assy.
See P.51.
2. Remove the ADF glass assy.
See P.52
3. Remove eight screws [1], and
remove the BCRU shield cover [2].
A02FF2C515DA
A02FF2C101DA
[1]
[1]
[2]
d-Color MF201
Service Manual Y109660-1
d-Color MF201
To Next Page
Loading...
