3. Periodical check Field Service Ver. 1.0 Jun. 2008
14
Maintenance
*6: The count condition is different according to the paper length of the sub scanning direc-
tion.
3.3.2 Conditions for life specifications values
3.3.3 Control causing inhibited printing for one part when an inhibited-printing
event occurs in another part
• In order to reduce the maintenance call times: when printing prohibiting is reached for
any of the following parts, make printing prohibited also for other parts whose life value is
reached, and replace those parts at the same time.
Target parts: Fusing unit, transfer belt unit, imaging unit /C, imaging unit /M,
imaging unit /Y, imaging unit /K
Paper length of
sub scanning direction
Count value
Less than 216 mm 1 count
216 mm to 432 mm 2 counts
432 mm or more 3 counts
Item Description
Job type (standard mode)
Monochrome : Making 2 copies per job
Color : Making 2 copies per job
Paper size
A4 or 8
1
/
2
x 11
PV/M Black: 2,300 / Color: 500
Original density
(Coverage)
Color 5 % for each color
Monochrome K 5 %
Low power mode OFF
No. of operating days per month
20 days
(main power switch turned ON and OFF 20 times per month)
d-Color MF201
Service Manual Y109660-1
d-Color MF201
To Next Page
Loading...
Need help?
General
