Olivetti d-Color MF201 - 10.2 Service Mode Function Tree

Field Service Ver. 1.0 Jun. 2008 10. Service Mode
147
Adjustment / Setting
10.2 Service Mode function tree
✽ The function tree is shown to comply with the format displayed on the screen.
Service Mode Ref. page
Machine Adjustment Fusing Temperature Heater Roller P. 1 5 0
Pressure
Fusing Transport Speed P. 1 5 1
Printer Area Leading Edge Adjustment P. 1 5 2
Centering P. 1 5 3
Centering (Duplex 2nd Side) P. 1 5 4
Feed Direction Adjustment P. 1 5 5
Te s t C o py P. 1 5 5
Scan Area ADF Adjustment Zoom P. 1 5 6
Feed
Regist Loop
Erasure Width
Paper Passage
BK-S
Adjustment
Zoom P. 1 5 6
Feed P. 1 5 8
Erasure Width P. 1 5 9
Carriage Move P. 1 6 0
Shading Position P. 1 6 0
Te s t C o py P. 1 6 0
Printer Regist Loop P. 1 6 1
Color Reg. Adjust-
ment
Cyan P. 1 6 2
Magenta
Yellow
Manual Bypass Tray Adjustment P. 1 6 3
Lead Edge Erase Adjustment P. 1 6 3
Touch Panel Adjustment P. 1 6 3
Imaging Process
Adjustment
Gradation
Adjustment
Gradation P. 1 6 4
Resolution
High Compression Mode
D Max Density P. 1 6 5
Background Voltage Margin P. 1 6 5
Transfer Output Fine
Adjustment
Secondary transfer adj. P. 1 6 6
Primary transfer adj. P. 1 6 6
Image Stabilization Initialize + Image Stabilization P. 1 6 7
Stabilization Only P. 1 6 7
Thick Paper Density Adjustment P. 1 6 7
Toner Supply P. 1 6 8
Monochrome Density Adjustment P. 1 6 8
Dev. Bias Choice P. 1 6 8
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201