Olivetti d-Color MF201 - Jam; Maintenance; Service Call Counter; Service Total

10. Service Mode Field Service Ver. 1.0 Jun. 2008
254
Adjustment / Setting
10.6.3 Jam
10.6.4 Service Call Counter
10.6.5 Warning
10.6.6 Maintenance
10.6.7 Service Total
A. Total
Functions • To check the number of misfeeds that have occurred at different locations in the
machine.
• To clear the count of each counter.
Use • To check the number of paper misfeeds that have occurred.
Functions • To check the number of malfunctions that have occurred at different locations in the
machine.
• To clear the count of each counter.
Use • To check the number of malfunctions that have occurred.
Functions • To check the number of warning conditions detected according to the warming type
• To clear the count of each counter.
Use • To check the number of warning conditions that have been detected.
Setting/
Procedure
• When a warning condition occurs, an oil mark appears at the lower left corner of the
basic screen.
• Touching the maintenance key will display the warning code screen.
Functions • To set a count value for maintenance of any given part.
Use • When any given part is replaced.
Setting/
Procedure
Maint.-Set
• Enter the maintenance counter value from the 10-key pad.
• The default setting is “0.”
0 to 999999
Maint.-Count
• Counts up when a sheet of paper is fed through the machine.
• A warning message appears if the count reaches a preset value.
Functions • To display the count value for the service total counter.
Use • Use to check the total No. of printed pages including the ones printed by the Service
Mode.
Setting/
Procedure
Service Total : No. of pages printed by user mode and Service Mode.
Service Total (Duplex) : No. of pages printed by user mode and Service Mode in
duplex.
d-Color MF201
Service Manual Y109660-1
d-Color MF201