Field Service Ver. 1.0 Jun. 2008 8. Utility Mode
119
Adjustment / Setting
8.3.3 Default Settings
A. Copy
B. Fax/Scan
(1) Default Scan/Fax Settings
(2) IP Relay Dest. Selection
Functions • To make default settings for the copy mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
Use • To change the Initial mode setting to meet the user’s need.
Setting/
Procedure
<Current Setting>
• The settings made on the control panel before entering the setting menu screens are
registered as the default settings of copy functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the
default settings of copy functions.
Functions • To make default settings for the fax/scan mode.
* The machine is initialized at the following timings:
• The main power switch is turned ON.
• Panel is reset.
• In an Interrupt mode.
• Auto Reset
• The password entry screen for account track is changed.
Use • To change the Initial mode setting to meet the user’s need.
Setting/
Procedure
<Current Setting>
• The settings made on the control panel before entering the setting menu screens are
registered as the default settings of fax/scan functions.
<Factory Default>
• The settings made at the time of shipment from the factory are registered as the
default settings of fax/scan functions.
Functions
• To set the priority for the relay destiny when several IP relay destinies are registered.
Use
Setting/
Procedure
• Select the relay destiny which priority should be changed, and change the priority
using n and p keys.
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
