Field Service Ver. 1.0 Jun. 2008 8. Utility Mode
143
Adjustment / Setting
8.6.13 Ping
8.6.14 Firmware Version
8.6.15 Security Settings
A. Function Mgmt Settings
(1) Maximum Job Allowance
Functions • To set the TCP/IP network diagnosis by Ping.
Use • To check the condition of TCP/IP network.
Setting/
Procedure
1. Touch [Ping].
2. Select the destination to send the Ping.
(When selecting [Ping IP Address], enter the IP address of the destination server.)
3. Press the start key, and check that it is connected.
Functions • To display the firmware version of this machine.
Use • To check the firmware version when trouble occurs while updating the firmware.
• Types of firmware displayed are as follows.
MAIN, Printer, LCT, Job Sep., Fax (Europe only)
Setting/
Procedure
1. Touch [Firmware Version].
2. Confirm the firmware version.
Functions
• To set the upper limit of the number of copy or PC print when management function
has been set.
Use
Setting/
Procedure
• The default setting is OFF.
“OFF”, 1 to 999
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
Need help?
General
