Field Service Ver. 1.0 Jun. 2008 8. Utility Mode
141
Adjustment / Setting
8.6.12 Software Switch Setting
A. List of the software switch settings for administrator
(1) For network settings
(2) For scan/fax settings
Functions • To specify the value (mode, bit, HEX) for software DIPSW to suit the purpose of the
use, and to change the machine status.
• Only software DIPSW available of setting by the user (administrator) are described
here.
• For details of the software DIPSW as well as software DIPSW which can be set by
CE, refer to the “Service mode” section or FK-507 service manual.
Use
Setting/
Procedure
1. Touch [Software Switch Setting].
2. Touch [Mode Selection], and enter the mode number (three digit number) using the
10-key pad.
3. Touch [Bit Selection].
4. Set the cursor using the [m] or [o] key to specify the bit with 0 or 1 on the 10-key
pad.
(When setting in hexadecimal, press [HEX Selection] to enter using the 10-key pad
or A to F key.)
5. Touch [Apply].
6. Touch [OK].
Mode Setting item
356 • Specifying settings concerning the SMTP transmission timeout
357 • Specifying settings concerning the SMTP reception timeout
358 • Specifying settings concerning the POP3 reception timeout
361•Specifying settings concerning Assistant tool for MF201, SMTP transmission/reception
and POP3 reception
364 • Specifying the setting for the POP Before SMTP time
367 • Specifying settings concerning the timeout for a DNS inquiry
372 • Specifying settings concerning the transmission interval for divided e-mail messages
380 • Specifying security settings for e-mail transmissions
383 • Specifying security settings for e-mail receptions
384 • Specifying settings concerning the network protocol
389 • Specifying settings concerning the encryption method for SSL
470•Specifying settings concerning Assistant tool for MF201
Mode Setting item
000 • Specifying settings concerning the position of the transmission source information and
concerning password communications
001 • Specifying settings for inserting the recipient’s name in the original
002 • Specifying printing of the memory clear report and the report for a broadcast transmis-
sion
004 • Specifying the storage time for failed transmission documents
016 • Specifying whether or not a received date report is added and its format
023 • Specifying settings for the image in the results report
024 • Specifying settings for administrator forwarding
025 • Specifying settings concerning transmission if the memory becomes full
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
Need help?
General
