Olivetti d-Color MF201 Service Manual

Field Service Ver. 1.0 Jun. 2008 10. Service Mode
191
Adjustment / Setting
Mode Default value
319
Bit 7654 3210
HEX: 20
State 0010 0000
Bit Setting item
Setting value
Description
01
5-0 Setting printing area for ADF back side lead-
ing edge 1 (A).
Set so that the total of the value with mode
320 bit [5-0] becomes 80mm or under.
000000 0 mm
000001 1 mm
:
100000 32 mm
:
111111 63 mm
Mode Default value
320
Bit 7654 3210
HEX: 07
State 0000 0111
Bit Setting item
Setting value
Description
01
5-0 Setting printing area for ADF back side lead-
ing edge 2 (B).
Set so that the total of the value with mode
312 bit [5-0] becomes 80mm or under.
000000 0 mm
:
000111 7 mm
:
111111 63 mm
Mode Default value
321
Bit 7654 3210
HEX: 21
State 0010 0001
Bit Setting item
Setting value
Description
01
6-0 Setting printing area for ADF back side poste-
rior end 1 (C).
Set so that the value is same as that of mode
322 bit [6-0] or over.
0000000 0 mm
0000001 1 mm
:
0100001 33 mm
:
1000010 66 mm
others Not available
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201

Olivetti d-Color MF201 Specifications

General

Brand	Olivetti
Model	d-Color MF201
Category	All in One Printer
Language	English