Field Service Ver. 1.0 Jun. 2008 10. Service Mode
207
Adjustment / Setting
Mode Default value
368
Bit 7654 3210
HEX: 82
State 1000 0010
Bit Setting item
Setting value
Description
01
7 Communication management report CSV
output
Not out-
put
Output
1 Communication log (TX) for scanner trans-
mission Not print
Print
Sets whether to print logs
in TX report, activity
report.
0 Result of communication received from an IP
Relay sending fax
Not print Print
Mode Default value
370
Bit 7654 3210
HEX: FF
State 1111 1111
Bit Setting item
Setting value
Description
01
7-0 Additional number of times to retry transmis-
sion (Network function)
Specify additional retrial times after retrying
the number of times specified by the user.
“0” indicates no additional retrial following the
current number of times specified by the user.
0000 0000 0
0000 0001 1
:
1111 1111 255
Mode Default value
371
Bit 7654 3210
HEX: 40
State 0100 0000
Bit Setting item
Setting value
Description
01
7-5 Retry interval for “additional number of times
to retry transmission” (Network function)
000 10 min.
001 15 min.
010 20 min.
011 25 min.
100 30 min.
others Not available
1 Binary division
No Yes
Sets Yes/No for binary
division during scan to e-
mail.
0 Page division
No Yes
Sets Yes/No for page divi-
sion during Internet fax (e-
mail), scan to e-mail.
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201