Field Service Ver. 1.0 Jun. 2008 10. Service Mode
217
Adjustment / Setting
Mode Default value
402
Bit 7654 3210
HEX: 04
State 0000 0100
Bit Setting item
Setting value
Description
01
7 Average density (Copy)
Relative luminosity
• Difference of the color on original (visual
difference) and the gray level are shown as
monochromic density when copied. It can
clearly copy the color of the marker, blue
lines on graph paper, and red seals.
Average density
• Only gradation level is shown as mono-
chromic density when copied regardless of
the color on the original. It is useful when
using monochromic color for magazine,
newspaper, etc, which are printed with
tones, or when removing the yellowing on
the original.
Disable Enable Specifies average density
/ Relative luminous effi-
ciency function.
6-5 Priority copy mode (Copy)
00 Simplex o Simplex
01 Simplex o Duplex
10 Duplex o Simplex
11 Duplex o Duplex
4-3 Priority auto mode (Copy)
00 APS
01 AMS
10 Not available
11 Manual
2 Primary application
Copying
Printing
Specifies the primary use
of the machine.
1 Neg./Pos. reverse
Disable Enable
Specifies the default value
for Neg./Pos. reverse.
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
Need help?
General
