Field Service Ver. 1.0 Jun. 2008 17. Malfunction code
295
Troubleshooting
C6704 Image input time out • The scan motion is not completed even after the
lapse of a predetermined period of time because of
a hardware failure or other reason.
C
C6751 CCD clamp/gain adjustment
failure
• The automatic gain control fails to converge when
the main unit is started or a scan motion is started
(the exposure unit does not move to the white refer-
ence position, or the automatic gain control is not
properly completed as a result of a hardware failure).
B
C8001 • Not used.
CC151 ROM contents error upon
start-up
• A fault detected in a sequence of ROM contents
check of the orinter control board during starting.
C
CC155 Finisher ROM error See P.23 of the JS-505 service manual. C
Code Item Detection timing
Rank
d-Color MF201
Y109660-1 Sevice Manual
d-Color MF201
To Next Page
Loading...
Need help?
General
