Quantum Superloader 3 User Manual

Chapter 5 Troubleshooting
SuperLoader Error Logs
SuperLoader User’s Guide 149
SYS Performance 35
SYS Asyc stop 36
SYS Cleaning error 37
SYS 12C Device Error 38
SYS offline 39
SYS Door locked 3A
SYS Open front 3B
SYS Over temp 3C
SYS Drive Error 3D
SYS Drv Load Err 3E
SYS Drv Unload Err 3F
Command in Progress 51
Unsupported Command 52
Command Failed 53
Device Not Ready 54
Invalid Element Address 55
Invalid Page Code 56
Invalid Test # 57
Exchange Command/Not
Supported
58
Invalid Command Parameter 59
Mechanical Positioning\Error 5A
Destination Element Full 5B
Screen Display Error Code

Quantum Superloader 3 Specifications

General

Product Type	Tape Autoloader
Number of Tape Drives Installed	1
Number of Cartridge Slots	8
Tape Technology	LTO Ultrium
Data Compression Ratio	2:1
Native Capacity	12 TB
Compressed Capacity	24 TB
Interfaces	SAS
Humidity	20% to 80% non-condensing
Operating Temperature	10°C to 35°C
Supported Media	LTO-5, LTO-4