SYSTem Subsystem R&S FSL
1300.2519.12 6.258 E-11
S
YSTem:FIRMware:UPDate
This command starts a firmware update using the *.msi files in the selected directory. The
default path is D:\FW_UPDATE. The path is changed via the MMEMory:CDIRectory
command. To store the update files the MMEMory:DATA command is used.
This command is an event and therefore has no query and no *RST value.
Example
SYST:FIRM:UPD 'D:\FW_UPDATE'
Starts the firmware update from directory D:\FW_UPDATE.
Characteristics
*RST value: -
SCPI: device-specific
Mode
all
SYSTem:FORMat:IDENt
This command defines the response format to the *IDN? command. This function is intended
for re-use of existing control programs together with the R&S FSL.
Parameter
LEGacy format is compatible to the R&S FSP/FSU/FSQ family
NEW R&S FSL format
Example
SYST:FORM:IDEN LEG
Adapts the return value of *IDN? to the R&S FSP/FSU/FSQ family.
Characteristics
RST value: LEG
SCPI: device-specific
Mode
all
SYSTem:LANGuage
This command defines the system language.
Parameter
SCPI
Example
SYST:LANG 'SCPI'
Sets the system language to SCPI.
Characteristics
RST value: SCPI
SCPI: device-specific
Mode
all
To Next Page
Loading...
