Rohde & Schwarz R&S FSL3 - Page 1038

R&S FSL TRIGger Subsystem
1300.2519.12 6.279 E-11
T
RIGger<1|2>[:SEQuence]:LEVel:IFPower
This command sets the level of the IF power trigger source.
Parameter
–50 to –10 DBM
Example
TRIG:LEV:IFP –30DBM
Characteristics
*RST value: –20 DBM
SCPI: device–specific
Mode
all
TRIGger<1|2[:SEQuence]:LEVel[:EXTernal]
This command sets the level of the external trigger source.
Parameter
<numeric value>
Characteristics
*RST value: 50 PCT
SCPI: device–specific
Mode
all
TRIGger<1|2>[:SEQuence]:LEVel:VIDeo
This command sets the level of the video trigger source.
Parameter
0 to 100 PCT
Example
TRIG:LEV:VID 50PCT
Characteristics
*RST value: 50 PCT
SCPI: device–specific
Mode
all, except ADEMOD