R&S FSL CONFigure:BTOoth Subsystem (BLUETOOTH, K8)
1300.2519.12 6.361 E-11
IBSemissions Spurious Emissions (EDR) measurement
DPENcoding Differential Phase Encoding (EDR) measurement
CFSTability Carrier Frequency Stability and Modulation Accuracy (EDR)
measurement
Example
CONF:BTO:MEAS ACLR
Selects the measurement of the adjacent channel power.
Characteristics
*RST value: OPOWer
SCPI: device–specific
Mode
BT
CONFigure:BTOoth:PBSCo
This command selects the number of payload bytes that are transmitted in a packet.
Parameter
1 – 1000
Example
CONF:BTO:PBSC 50
Selects the number of payload bytes.
Characteristics
RST value: 1
SCPI: device–specific
Mode
BT
CONFigure:BTOoth:PCLass
This command selects the power class for the Output Power measurement. The power class
defines the limits for the output power measurement.
Parameter
1 to 3
Example
CONF:BTO:PCL 3
Selects power class 3
Characteristics
*RST value: 1
SCPI: device–specific
Mode
BT
To Next Page
Loading...
