CONFigure:BTOoth Subsystem (BLUETOOTH, K8) R&S FSL
1300.2519.12 6.360 E-11
CONFigure:BTOoth:IBSemissions:ACPairs
This command selects the number of adjacent channel pairs during the In–band Spurious
Emissions measurement. The number of adjacent channels will be limited as soon as the border
of the Bluetooth frequency band is reached.
N
ote: This command is only available with active In–band Spurious Emissions measurement
(see CONFigure:BTOoth:MEASurement command).
Parameter
1 to 78
Example
CONF:BTO:IBS:ACP 20
Selects 20 adjacent channel pairs.
Characteristics
*RST value: 78
SCPI: device–specific
Mode
BT
CONFigure:BTOoth:IBSemissions:GATE:AUTO
This command adjusts the gate settings for the In–band Spurious Emissions automatically.
Note: This command is only available with active In–band Spurious Emissions measurement
(see CONFigure:BTOoth:MEASurement command).
Parameter
ONCE
Example
CONF:BTO:IBS:GATE:AUTO ONCE
Adjusts the gate automatically once.
Characteristics
RST value: ONCE
SCPI: device–specific
Mode
BT
CONFigure:BTOoth:MEASurement
This command selects the current measurement according to the Bluetooth standard.
Parameter
OPOWer Output Power measurement
ACLR Adjacent Channel Power measurement
MCHar Modulation Characteristics measurement
ICFTolerance Initial Carrier Frequency Tolerance measurement
CFDRift Carrier Frequency Drift measurement
RTPower Relative Transmit Power (EDR) measurement
To Next Page
Loading...
