Rohde & Schwarz R&S FSL3 - Page 1173

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.414 E-11
Characteristics
RST value: –10 kHz
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CARRiers:S1IFoffset:UPPer
This command defines the upper frequency offset limit of the sound carrier 1.
The numeric suffixes <1|2> are irrelevant.
Parameter
–999,999 to 999,999 Hz
Example
CALC:ATV:LIM:CARR:S1IF:UPP 10KHZ
Sets the upper frequency offset limit for sound carrier 1 to 10 kHz.
Characteristics
RST value: 10 kHz
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:CARRiers:S1PRelative:LOWer
This command defines the relative lower power limit of the sound carrier 1.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dB
Example
CALC:ATV:LIM:CARR:S1PR:LOW –10
Sets the relative lower power limit for sound carrier 1 to –10 dB.
Characteristics
RST value: –20 dB
SCPI: device–specific
Mode
CATV