Rohde & Schwarz R&S FSL3 - Page 1172

R&S FSL CALCulate Subsystem (CATV, K20)
1300.2519.12 6.413 E-11
CALCulate:ATV:LIMit Subsystem (CATV, K20)
The CALCulate:ATV:LIMit subsystem sets and checks the measurement limits for analog TV
measurements.
T
he following subsystem is included:
• "CALCulate:ATV:LIMit:RESult Subsystem (CATV, K20)" on page 6.423
Commands of the CALCulate:ATV:LIMit Subsystem
– CALCulate<1|2>:ATV:LIMit:CARRiers:S1IFoffset:LOWer
– CALCulate<1|2>:ATV:LIMit:CARRiers:S1IFoffset:UPPer
– CALCulate<1|2>:ATV:LIMit:CARRiers:S1PRelative:LOWer
– CALCulate<1|2>:ATV:LIMit:CARRiers:S1PRelative:UPPer
– CALCulate<1|2>:ATV:LIMit:CARRiers:S2IFoffset:LOWer
– CALCulate<1|2>:ATV:LIMit:CARRiers:S2IFoffset:UPPer
– CALCulate<1|2>:ATV:LIMit:CARRiers:S2PRelative:LOWer
– CALCulate<1|2>:ATV:LIMit:CARRiers:S2PRelative:UPPer
– CALCulate<1|2>:ATV:LIMit:CARRiers:VCFoffset:LOWer
– CALCulate<1|2>:ATV:LIMit:CARRiers:VCFoffset:UPPer
– CALCulate<1|2>:ATV:LIMit:CARRiers:VCPabsolute:LOWer
– CALCulate<1|2>:ATV:LIMit:CARRiers:VCPabsolute:UPPer
– CALCulate<1|2>:ATV:LIMit:CN:CN[:LOWer]
– CALCulate<1|2>:ATV:LIMit:CSO:CSO[:LOWer]
– CALCulate<1|2>:ATV:LIMit:CTB:CTB[:LOWer]
– CALCulate<1|2>:ATV:LIMit:HUM:HUM:LOWer
– CALCulate<1|2>:ATV:LIMit:HUM:HUM:UPPer
– CALCulate<1|2>:ATV:LIMit:VMODulation:MDEPth:LOWer
– CALCulate<1|2>:ATV:LIMit:VMODulation:MDEPth:UPPer
– CALCulate<1|2>:ATV:LIMit:VMODulation:RPC:LOWer
– CALCulate<1|2>:ATV:LIMit:VMODulation:RPC:UPPer
– CALCulate<1|2>:ATV:LIMit:VMODulation:VCPower:LOWer
– CALCulate<1|2>:ATV:LIMit:VMODulation:VCPower:UPPer
CALCulate<1|2>:ATV:LIMit:CARRiers:S1IFoffset:LOWer
This command defines the lower frequency offset limit of the sound carrier 1.
The numeric suffixes <1|2> are irrelevant.
Parameter
–999,999 to 999,999 Hz
Example
CALC:ATV:LIM:CARR:S1IF:LOW 1KHZ
Sets the lower frequency offset limit for sound carrier 1 to 1 kHz.