Rohde & Schwarz R&S FSL3 - Page 1180

R&S FSL CALCulate Subsystem (CATV, K20)
1300.2519.12 6.421 E-11
C
haracteristics
RST value: 0%
SCPI: device–specific
M
ode
CATV
CALCulate<1|2>:ATV:LIMit:VMODulation:RPC:UPPer
This command defines the upper limit for the residual picture in the Vision Modulation
measurement.
The numeric suffixes <1|2> are irrelevant.
Parameter
0 to 100%
Example
CALC:ATV:LIM:VMOD:RPC:UPP 80
Sets the upper limit for the residual picture to 80%.
Characteristics
RST value: 100%
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:VMODulation:VCPower:LOWer
This command defines the lower vision carrier power limit in the Vision Modulation
measurement.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dBm
Example
CALC:ATV:LIM:VMOD:VCP:LOW –50
Sets the lower vision carrier power limit to –50 dBm.
Characteristics
RST value: –60 dBm
SCPI: device–specific
Mode
CATV