Rohde & Schwarz R&S FSL3 - Page 1181

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.422 E-11
C
ALCulate<1|2>:ATV:LIMit:VMODulation:VCPower:UPPer
This command defines the upper vision carrier power limit in the Vision Modulation
measurement.
The numeric suffixes <1|2> are irrelevant.
Parameter
–200 to 200 dBm
Example
CALC:ATV:LIM:VMOD:VCP:UPP 20
Sets the upper vision carrier power limit to 20 dBm.
Characteristics
RST value: 30 dBm
SCPI: device–specific
Mode
CATV