Rohde & Schwarz R&S FSL3 - Page 1179

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.420 E-11
C
ALCulate<1|2>:ATV:LIMit:VMODulation:MDEPth:LOWer
This command defines the lower modulation depth limit for the vision modulation.
T
he numeric suffixes <1|2> are irrelevant.
Parameter
0 to 100%
Example
CALC:ATV:LIM:VMOD:MDEP:LOW 0.5
Sets the lower modulation depth limit of the vision modulation to 0.5%.
Characteristics
RST value: 0%
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:VMODulation:MDEPth:UPPer
This command defines the upper modulation depth limit for the vision modulation.
The numeric suffixes <1|2> are irrelevant.
Parameter
0 to 100%
Example
CALC:ATV:LIM:VMOD:MDEP:UPP 30
Sets the upper modulation depth limit of the vision modulation to 30%.
Characteristics
RST value: 100%
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:LIMit:VMODulation:RPC:LOWer
This command defines the lower limit for the residual picture in the Vision Modulation
measurement.
The numeric suffixes <1|2> are irrelevant.
Parameter
0 to 100%
Example
CALC:ATV:LIM:VMOD:RPC:LOW 0.5
Sets the lower limit for the residual picture to 0.5%.