Rohde & Schwarz R&S FSL3 - Page 1192

R&S FSL CALCulate Subsystem (CATV, K20)
1300.2519.12 6.433 E-11
C
ALCulate<1|2>:ATV:LIMit:RESult:VMODulation:VCPower:UPPer?
This command performs an upper limit check for the vision carrier power in the Vision
Modulation measurement.
The numeric suffixes <1|2> are irrelevant.
This command is a query and therefore has no *RST value.
Example
CALC:ATV:LIM:VMOD:VCP:UPP 20
Sets the upper vision carrier power limit to 20 dBm.
INIT;*WAI
Starts a new measurement and waits for the sweep end.
CALC:ATV:LIM:RES:VMOD:VCP:UPP?
Performs an upper limit check for the vision carrier power in the Vision Modulation
measurement.
Characteristics
RST value: –
SCPI: device–specific
Mode
CATV