Rohde & Schwarz R&S FSL3 - Page 1197

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.438 E-11
CALCulate:ATV:UNIT:POWer Subsystem (CATV, K20)
The CALCulate:ATV:UNIT:POWer subsystem sets the unit for the measurements for analog TV
measurements.
Commands of the CALCulate:ATV:UNIT:POWer Subsystem
– CALCulate<1|2>:ATV:UNIT:POWer:HUM
– CALCulate<1|2>:ATV:UNIT:POWer:VCPabsolute
CALCulate<1|2>:ATV:UNIT:POWer:HUM
This command defines the unit of the Hum measurement values.
The numeric suffixes <1|2> are irrelevant.
Parameter
DB | PCT
Example
CALC:ATV:UNIT:POW:HUM PCT
Sets the unit for the Hum measurement values to percent.
Characteristics
RST value: dB
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:ATV:UNIT:POWer:VCPabsolute
This command defines the unit of the absolute vision carrier power.
The numeric suffixes <1|2> are irrelevant.
Parameter
DB | PCT
Example
CALC:ATV:UNIT:POW:VCP DB
Sets the unit for the absolute vision carrier power to dB.
Characteristics
RST value: dBm
SCPI: device–specific
Mode
CATV