R&S FSL CALCulate Subsystem (CATV, K20)
1300.2519.12 6.441 E-11
CALCulate:DTV Subsystem (CATV, K20)
The CALCulate:DTV subsystem contains commands to analyze the digital TV measurement data.
The following subsystems are included:
• "CALCulate:DTV:LIMit Subsystem (CATV, K20)" on page 6.441
• "CALCulate:DTV:RESult Subsystem (CATV, K20)" on page 6.459
• "CALCulate:DTV:UNIT:POWer Subsystem (CATV, K20)" on page 6.461
CALCulate:DTV:LIMit Subsystem (CATV, K20)
The CALCulate:DTV:LIMit subsystem sets and checks the measurement limits for digital TV
measurements.
The following subsystem is included:
• "CALCulate:DTV:LIMit:RESult Subsystem (CATV, K20)" on page 6.450
Commands of the CALCulate:DTV:LIMit Subsystem
– CALCulate:DTV:LIMit:CFOFfset:LOWer
– CALCulate:DTV:LIMit:CFOFfset:UPPer
– CALCulate:DTV:LIMit:CHPower:UPPer
– CALCulate:DTV:LIMit:CHPower:LOWer
– CALCulate:DTV:LIMit:CSUPpression[:LOWer]
– CALCulate:DTV:LIMit:EVMPeak:LOWer
– CALCulate:DTV:LIMit:EVMPeak:UPPer
– CALCulate:DTV:LIMit:EVMRms:LOWer
– CALCulate:DTV:LIMit:EVMRms:UPPer
– CALCulate:DTV:LIMit:IMBalance:LOWer
– CALCulate:DTV:LIMit:IMBalance:UPPer
– CALCulate:DTV:LIMit:MERPeak:LOWer
– CALCulate:DTV:LIMit:MERPeak:UPPer
– CALCulate:DTV:LIMit:MERRms:LOWer
– CALCulate:DTV:LIMit:MERRms:UPPer
– CALCulate:DTV:LIMit:PJITter[:UPPer]
– CALCulate:DTV:LIMit:QERRor:LOWer
– CALCulate:DTV:LIMit:QERRor:UPPer
– CALCulate:DTV:LIMit:SROFfset:LOWer
– CALCulate:DTV:LIMit:SROFfset:UPPer
To Next Page
Loading...
