Rohde & Schwarz R&S FSL3 - Page 1221

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.462 E-11
CALCulate<1|2>:DTV:UNIT:POWer:EVMRms
This command defines the unit of the root mean square value of the error vector magnitude in
the Overview / Modulation Errors measurement.
The numeric suffixes <1|2> are irrelevant.
Parameter
DB | PCT
Example
CALC:DTV:UNIT:POW:EVMR PCT
Sets the unit for the root mean square value of the error vector magnitude to percent.
Characteristics
RST value: dB
SCPI: device–specific
Mode
CATV
CALCulate<1|2>:DTV:UNIT:POWer:MERPeak
This command defines the unit of the modulation error rate peak in the Overview / Modulation
Errors measurement.
The numeric suffixes <1|2> are irrelevant.
Parameter
DB | PCT
Example
CALC:DTV:UNIT:POW:MERP PCT
Sets the unit for the unit of the modulation error rate peak to percent.
Characteristics
RST value: dB
SCPI: device–specific
Mode
CATV