Rohde & Schwarz R&S FSL3 - Page 1222

R&S FSL CALCulate Subsystem (CATV, K20)
1300.2519.12 6.463 E-11
C
ALCulate<1|2>:DTV:UNIT:POWer:MERRms
This command defines the unit of the root mean square value of the modulation error rate in the
Overview / Modulation Errors measurement.
The numeric suffixes <1|2> are irrelevant.
Parameter
DB | PCT
Example
CALC:DTV:UNIT:POW:MERR DB
Sets the unit for the root mean square value of the modulation error rate to dB.
Characteristics
RST value: % (PCT)
SCPI: device–specific
Mode
CATV