Rohde & Schwarz R&S FSL3 - Page 1223

CALCulate Subsystem (CATV, K20) R&S FSL
1300.2519.12 6.464 E-11
CALCulate:MARKer Subsystem (CATV, K20)
The CALCulate:MARKer subsystem checks the marker functions of the instrument.
The following subsystem is included:
• "CALCulate:MARKer:FUNCtion Subsystem (CATV, K20)" on page 6.466
Commands of the CALCulate:MARKer Subsystem
– CALCulate<1|2>:MARKer<1...4>[:STATe]
– CALCulate<1|2>:MARKer<1...4>:AOFF
– CALCulate<1|2>:MARKer<1...4>:LOEXclude
– CALCulate<1|2>:MARKer<1...4>:MAXimum[:PEAK]
– CALCulate<1|2>:MARKer<1...4>:MAXimum:LEFT
– CALCulate<1|2>:MARKer<1...4>:MAXimum:NEXT
– CALCulate<1|2>:MARKer<1...4>:MAXimum:RIGHt
– CALCulate<1|2>:MARKer<1...4>:MINimum[:PEAK]
– CALCulate<1|2>:MARKer<1...4>:MINimum:LEFT
– CALCulate<1|2>:MARKer<1...4>:MINimum:NEXT
– CALCulate<1|2>:MARKer<1...4>:MINimum:RIGHt
– CALCulate<1|2>:MARKer<1...4>:PEXCursion
– CALCulate<1|2>:MARKer<1...4>:TRACe
– CALCulate<1|2>:MARKer<1...4>:X
– CALCulate<1|2>:MARKer<1...4>:X:SLIMits:LEFT
– CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHT
– CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:STATe]
– CALCulate<1|2>:MARKer<1...4>:Y?
– CALCulate<1|2>:MARKer<1...4>:Y:PERCent
CALCulate<1|2>:MARKer<1...4>[:STATe]
For details refer to "CALCulate<1|2>:MARKer<1...4>[:STATe]" on page 6.56.
CALCulate<1|2>:MARKer<1...4>:AOFF
For details refer to "CALCulate<1|2>:MARKer<1...4>:AOFF" on page 6.56.
CALCulate<1|2>:MARKer<1...4>:LOEXclude
For details refer to "CALCulate<1|2>:MARKer<1...4>:LOEXclude" on page 6.58.
CALCulate<1|2>:MARKer<1...4>:MAXimum[:PEAK]
For details refer to "CALCulate<1|2>:MARKer<1...4>:MAXimum[:PEAK]" on page 6.58.