R&S FSL TRACe Subsystem (CDMA, K82)
1300.2519.12 6.629 E-11
TRAC? TRACE1
Reads out the result in Hadamard order.
0 6 0 0 0.0 –7.0 9 9
1 6 32 0 –6.3 –13.3 9 9
2 6 1 0 –0.3 –7.3 9 9
10 5 8 3 –1.0 –8.0 9 9
10 7 24 3 –2.0 –9.0 9 9
11 6 2 3 –47.6 –54.6 9 9
...
11 6 63 3 –47.7 –54.7 9 9
CDP:TPM ON
Activates timing and phase offset measurement.
INIT;*WAI
Starts measurement with synchronization.
TRAC? CTAB
Reads out maximum timing and phase offsets.
1.20E–009,2,2,–3.01E–003,15,4,0,0,0,0,0,0
Max. time offset with code number and code class of associated channel, Max. phase offset
with code number and code class of associated channel, 6 reserved values
Result Summary
The results are output in the following order: <SLOT>, <PTOTal>, <PPICh>, <RHO>, <MACCuracy>,
<PCDerror>, <ACTive>, <FERRor>, <FERPpm>, <TFRame>, <CERRor>, <IQOFfset>,
<IQIMbalance>, <SRATe>, <CHANnel>, <SFACtor>, <TOFFset>, <POFFset>, <CDPRelative>,
<CDPabsolute>, <EVMRms>, <EVMPeak>
Global results of the selected PCG
Parameter Description
SLOT PCG number
PTOTal total power in dBm
PPICh pilot power in dBm
RHO RHO
MACCuracy composite EVM in %
PCDerror peak code domain error in dB
IQOFfset IQ offset in %
IQIMbalance IQ imbalance in %
Global results of all PCGs
Parameter Description
ACTive number of active channels
FERRor frequency error in Hz
FERPpm frequency error in ppm
TFRame trigger to frame; returns a '9' if the
trigger is set to Free Run.
CERRor chip rate error in ppm
To Next Page
Loading...
