R&S FSL CONFigure Subsystem (EVDO, K84)
1300.2519.12 6.649 E-11
10 Secondary 800 MHz band
11 400 MHz European PAMR band
12 800 MHz PAMR band
1
4 US PCS 1.9GHz Band
15 AWS Band
Example
CONF:CDP:BCL 1
Selects band class 1, 1900 MHz
Characteristics
RST value: 0
SCPI: device specific
Mode
EVDO
CONFigure:CDPower[:BTS]:MCARier[:STATe]
This command activates or deactivates the settings that improve the processing of multi-carrier
signals.
Parameter
ON | OFF
Example
CONF:CDP:MCAR ON
Activates the multi-carrier settings.
Characteristics
RST value: OFF
SCPI: device-specific
Mode
EVDO
CONFigure:CDPower[:BTS]:MEASurement
This command selects the measurements of the 1XEV-DO BTS Analyzer option. The
predefined settings of the different measurements are described in chapter 4, section "Softkeys
of the measurement menu (1XEV-DO BTS Analyzer mode)".
Parameter
ACLR adjacent–channel power measurement
CCDF measurement of complementary cumulative
distribution
CDPower code domain power measurement
ESPectrum measurement of spectrum emission mask
OBWidth measurement of the occupied bandwidth
POWer channel power measurement
PVTime Measurement of power versus time
To Next Page
Loading...
